Flow Comparator
Description
Combining highly accurate flow testing with low costs and ease of
use makes the Curtis Flow Comparator an indispensable asset. With a
flow range of between 0.3 and 3.0 L/min and a resolution of 0.0001
L/min, precise flow measurements can be taken.
Calibration against master components give a typical repeatability
and reproducibility of less than 7% while flowing at 0.6 L/min
(nominal) with a +/-1% tolerance. With a cycle time of 15 seconds for
a simple flow test, rising to 25 seconds for a dual test with
backpressure (available as an optional extra) makes testing fast as
well as accurate.
Specifications:
- A highly accurate yet low cost
inspection machine for comparing
components with calibrated masters. - Manual loading with results displayed
at eye level with a footprint of just
600x600mm. - Flow Rate: 0.3-3.0 L/min
- Accuracy: Gauge accuracy R&R less
than 7% for nominal 0.6 L/min with
+/-1% Tolerance - Cycle Time: 15 seconds for a simple
flow test - Low Maintenance
- Basic Tooling Included
- Full Documentation Supplied
- Flow against back pressure available
as an option - Optional fixed lift tooling for
needle/nozzle assemblies
Flexible options for the Human Machine Interface and multiple
user levels with password control, makes operation easy and quick
to learn.
Results may be sent to an attached printer or as an optional extra imported directly into Microsoft Excel or similar for study or electronic storage.
The manually loaded, ergonomically designed test fixture is supplied with a basic tooling set. This can be changed quickly and simply, forming a flexible machine capable of testing a range of product types. Extra sets of tooling manufactured to custom specification can be quoted for upon request.
Results may be sent to an attached printer or as an optional extra imported directly into Microsoft Excel or similar for study or electronic storage.
The manually loaded, ergonomically designed test fixture is supplied with a basic tooling set. This can be changed quickly and simply, forming a flexible machine capable of testing a range of product types. Extra sets of tooling manufactured to custom specification can be quoted for upon request.
